[sdiy] Wood working cv jacks!?

[Roman Sowa]

I have seen a lot of great stuff on YouTube. I mean really good. You 
see, I work with wood basically all my life and still some instructive 
movies there had made my jaw drop on the floor.

Roman

W dniu 2014-11-12 18:40, Dan Snazelle pisze:
> Can anyone recommend any good sites or books that deal with woodworking in relation to building instruments ? Or even just woodworking  ?
>
> It's such a mysterious art to me
>
> Sent from my iPhone
>
>> On Nov 12, 2014, at 11:50 AM, "Timothy Daugard" <daugard at cox.net> wrote:
>>
>>> On 11/12/2014 4:57 AM, Roman Sowa wrote:
>>> I would recommend adding small aluminium or brass panel on the wood. 1/8 jacks rarely alow for more panel thickness than 3mm, and wood of that size is just too fragile. Besides, such a plate looks super cool when compared to tiny jack pooped on a wood, which looks more like a knag or dirt from a distance.
>> I added a largeish metal washer behind the panel and a smaller washer on the front under the nut for the connector when I drill connector mounting holes with a spade bit.
>>
>> Tim Daugard
>>
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>