[sdiy] Wood working cv jacks!?

[Dan Snazelle]

Can anyone recommend any good sites or books that deal with woodworking in relation to building instruments ? Or even just woodworking  ?

It's such a mysterious art to me

Sent from my iPhone

> On Nov 12, 2014, at 11:50 AM, "Timothy Daugard" <daugard at cox.net> wrote:
> 
>> On 11/12/2014 4:57 AM, Roman Sowa wrote:
>> I would recommend adding small aluminium or brass panel on the wood. 1/8 jacks rarely alow for more panel thickness than 3mm, and wood of that size is just too fragile. Besides, such a plate looks super cool when compared to tiny jack pooped on a wood, which looks more like a knag or dirt from a distance.
> I added a largeish metal washer behind the panel and a smaller washer on the front under the nut for the connector when I drill connector mounting holes with a spade bit.
> 
> Tim Daugard
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy