[sdiy] Faceplate labels

[Jean-Pierre Desrochers]

HI Joe,

Just tested my web pages and they are back !!!

So just have a look here:
http://www.arcenson.com/projects/Modular/M100_MIDI_Interface/Module_pictures/
There are lots of detailed pictures on how I make my frontpanels.

Cheers !

J-Pierre

-------------------------------------------------

Le 2014-11-06 15:31, Jean-Pierre Desrochers a écrit :
> You are right my server is down..
> I already sent an email to my provider.
> I just received a ticket that they are looking at it now.
> Just try the link sometimes it will be back later today.
> Let me know when you get to it.
> (BTW I won't be home tonite but will check my emails early tomorrow)
> Sorry.
> JP
> 
> 
> 
> Le 2014-11-06 15:27, Joe Frey a écrit :
>> Jean-Pierre, My browser is timing out looking for this?
>> 
>> http://www.arcenson.com/projects/Modular/
>> 
>> Any chance your server is not running?
>> 
>> Thanks Joe.
>> 
>> 
>> 
>> 
>> Jean-Pierre Desrochers wrote:
>>> Hi Joe,
>>> 
>>> I personaly used and still use laminated self-adhesive vinyls
>>> for all my Moog system 55 clone modules front panels.
>>> Very detailed pictures here of how I did it:
>>> 
>>> http://www.arcenson.com/projects/Modular/
>>> 
>>> and check for the subdirectory named MIDI_interface/pictures.
>>> There are lots of detailed pictures on how I make my frontpanels.
>>> And by the way I use a small german program called Front Designer 
>>> v3.0
>>> http://www.abacom-online.de/uk/html/frontdesigner.html
>>> to lay all the texts, holes and potentiometer graphics.
>>> Then I create a PDF file to get it printed localy here.
>>> All my holes are punched using a small table press.
>>> 
>>> That's it !
>>> JP
>>> 
>>> ----------------------------------------------------------------------
>>> 
>>> 
>>> 
>>> Le 2014-11-06 14:03, Joe Frey a écrit :
>>>> Hello all, I am trying to make a readable faceplate for the first
>>>> time. I am going to use decals I think. Does anyone have advice? I
>>>> googled, "electronics faceplate labels" but came up empty. Does 
>>>> anyone
>>>> have the lines that go around knobs and sliders made already? Save
>>>> some time making them. Thanks.
>>>> 
>>>> --    (">  <")
>>>>    / )   ( \
>>>>  ''/ |   / |``
>>>>  "Anything worth doing, is worth doing badly, because it might make 
>>>> it
>>>> better the next time." --anon
>>>> 
>>>> Joe Frey
>>>> A.K.A. Bitter Relic of a Bygone Era
>>>> joe.frey at radioles.com
>>>> http://radioles.com
>>>> Chez Judex
>>>> http://radioles.com/judex/
>>>> Radio Lu-Lu (Internet radio)
>>>> http://radioles.com/radiolulu/
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Synth-diy mailing list
>>>> Synth-diy at dropmix.xs4all.nl
>>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>> 
>> 
>> --
>>    (">  <")
>>    / )   ( \
>>  ''/ |   / |``
>>  "Anything worth doing, is worth doing badly, because it might make it
>> better the next time." --anon
>> 
>> Joe Frey
>> A.K.A. Bitter Relic of a Bygone Era
>> joe.frey at radioles.com
>> http://radioles.com
>> Chez Judex
>> http://radioles.com/judex/
>> Radio Lu-Lu (Internet radio)
>> http://radioles.com/radiolulu/