[sdiy] Source for slide pots

[Chris McDowell]

Golly, you’re right. I thought for sure I saw them, cuz I need some too  :o



> On Oct 31, 2014, at 10:29 AM, Tim Ressel <timr at circuitabbey.com> wrote:
> 
> The 15mm are all detented, unless I missed something?
> 
> Tim Ressel
> Circuit Abbey
> 503-750-9331
> timr at circuitabbey.com
> 
> 
> 
> 
> ________________________________
> From: Chris McDowell <declareupdate at gmail.com>
> To: Tim Ressel <timr at circuitabbey.com> 
> Cc: Synthdiy Diy <synth-diy at dropmix.xs4all.nl> 
> Sent: Thursday, October 30, 2014 6:08 PM
> Subject: Re: [sdiy] Source for slide pots
> 
> 
> They actually have a few lever sizes, one being 15mm! 
> 
> Chris
> 
> 
> 
> 
>> On Oct 30, 2014, at 7:52 PM, Tim Ressel <timr at circuitabbey.com> wrote:
>> 
>> I had rejected those because they have 10mm levers and I thought I needed 15mm to fit. But looking at it again I think I can make the 10mm ones work.
>> 
>> Thanks!
>> 
>> Tim Ressel
>> Circuit Abbey
>> 503-750-9331
>> timr at circuitabbey.com
>> 
>> 
>> 
>> 
>> ________________________________
>> From: Chris McDowell <declareupdate at gmail.com>
>> To: Tim Ressel <timr at circuitabbey.com> 
>> Cc: Synthdiy Diy <synth-diy at dropmix.xs4all.nl> 
>> Sent: Thursday, October 30, 2014 3:04 PM
>> Subject: Re: [sdiy] Source for slide pots
>> 
>> 
>> 
>> Hi,
>> 
>> Like this? 
>> http://www.mouser.com/Passive-Components/Potentiometers-Trimmers-Rheostats/_/N-9q0yi?Keyword=PTL20&FS=True
>> 
>> Cheers! 
>> 
>> 
>> 
>> 
>> 
>> On Oct 30, 2014, at 4:41 PM, Tim Ressel <timr at circuitabbey.com> wrote:
>>> 
>>> Hi,
>>> 
>>> I am looking for small (20mm) slide pots with LEDs in the handle. All I can find have center detents. Does anyboby have a source for non-detented pots?
>>> 
>>> Thanks! 
>>> 
>>> Tim Ressel
>>> Circuit Abbey
>>> 503-750-9331
>>> timr at circuitabbey.com
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>