[sdiy] Wood working cv jacks!?
daugard at cox.net
Wed Nov 12 17:47:42 CET 2014
On 11/12/2014 4:57 AM, Roman Sowa wrote:
> I would recommend adding small aluminium or brass panel on the wood.
> 1/8 jacks rarely alow for more panel thickness than 3mm, and wood of
> that size is just too fragile. Besides, such a plate looks super cool
> when compared to tiny jack pooped on a wood, which looks more like a
> knag or dirt from a distance.
I added a largeish metal washer behind the panel and a smaller washer on
the front under the nut for the connector when I drill connector
mounting holes with a spade bit.
More information about the Synth-diy