[sdiy] Load testing dual PSU

Rob Spencer Rob at gmsn.co.uk
Mon Nov 3 13:24:14 CET 2014


I've recently developed a +-12v PSU, with +5v and post voltage protection and am looking to do some load testing. I know I could stick a low resistance across it but that's going to get very hot very quickly. The other thing I'm thinking is to place some 12v light bulbs across the rails and leave it running for a few days with temperature monitoring in place on the voltage regulators.

I'm wondering how other people have tackled this in the past.



More information about the Synth-diy mailing list