[sdiy] Mains interference

[cheater00 .]

Yup, that's thermite.

On Thu, Mar 27, 2014 at 6:22 PM, BrightBoy <jdec at mindspring.com> wrote:
> If the main panel ground wire is connected to the grounding
> rod(s) with only a clamp, you may want to replace with a
> permanent, lower impedence connection using an exothermic
> welding process:
>
> https://www.youtube.com/watch?v=bBnbB3fiux0
>
> Cheers,
>
> Jeff
>
> -----Original Message-----
>>From: Neil Johnson <neil.johnson71 at gmail.com>
>>Sent: Mar 27, 2014 7:42 AM
>>To: Oakley Sound <oakleylist at btinternet.com>
>>Cc: Synth DIY <synth-diy at dropmix.xs4all.nl>
>>Subject: Re: [sdiy] Mains interference
>>
>>Tony,
>>
>>> Any pointers you can give would be very much appreciated.
>>
>>http://en.wikipedia.org/wiki/Earthing_system#IEC_terminology
>>
>>You might have dodgy earth, or a higher-than-you'd-like earth.  A
>>chunky earth rod might improve your local situation, but check with an
>>electrician first, or try your electricity board to see if they'll
>>test it/sort it for free.
>>
>>Neil
>>
>>--
>>http://www.njohnson.co.uk
>>_______________________________________________
>>Synth-diy mailing list
>>Synth-diy at dropmix.xs4all.nl
>>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy