[sdiy] ADSR Trigger/Retrigger behaviour

Justin Owen juzowen at gmail.com
Mon Jun 30 14:05:41 CEST 2014


Wow! Thanks to everyone for their responses on this - loads to think about now...

Much appreciated.

- Justin



-----Original Message-----
From: Olivier Gillet [ol.gillet at gmail.com]
Received: 27.06.2014 14:30:41
To: Justin Owen
Cc: SDIY List
Subject: Re: [sdiy] ADSR Trigger/Retrigger behaviour

The early version of the Shruthi had the "always restart the attack
from 0" behavior and I got complaints about it. I then implemented the
behavior described in your message and nobody has ever complained
about it since. Anything that generates discontinuities (and thus
clicks) is going to annoy some people.

Olivier

On Fri, Jun 27, 2014 at 3:08 PM, Justin Owen <juzowen at gmail.com> wrote:
> Hello,
>
> I'm looking at adding Trigger/Retrigger functionality to an ADSR design I'm working on but it's not a feature I've used that much so I was hoping for some clarification.
>
> I understand that while the Gate is High, the envelope will restart from the Attack stage each time a Trigger is received.
>
> Most diagrams show the Attack section starting from whatever output level the ADSR was at when the Trigger was received. Two examples are this one from MFOS (top right):
>
> http://www.musicfromouterspace.com/analogsynth_new/ADSR001/ADSR001_cyclediags.gif
>
> and the diagram in the Doepfer A-140 manual.
>
> ...so is this standard? The ADSR rests to the Attack stage but the Attack starts at whatever level it was at when the Trigger was received - or (perhaps just in an ideal world...) would you expect the Attack stage to be reset fully and start from 0V?
>
> From a circuit POV I can understand why it would reset to it's current voltage but I'd be interested to hear if people who use this feature regularly would expect or prefer something different.
>
> Thanks as always,
>
> - Justin
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy





More information about the Synth-diy mailing list