[sdiy] Rail to rail replacement for TL06x as S&H buffer ?

[Colin f]

Thanks guys.
I was looking at the TS91x, wasn't sure if there was a gotcha I was missing.
It'd need the -V supply to go to ground instead of -15V, so not a drop-in
replacement, but it looks like a good bet if there isn't anything that can
take +/-15V.
I'll order some of those and see how they go.

Cheers,
Colin

> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl 
> [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of 
> Olivier Gillet
> Sent: 11 June 2014 13:54
> To: Roman Sowa
> Cc: synth-diy diy
> Subject: Re: [sdiy] Rail to rail replacement for TL06x as S&H buffer ?
> 
> Other rail to rail IO parts with similar supply range (up to 16V):
> TLV2372
> LMC6482IN
> 
> (I used the TS912 in a kit too, but switched to TLV2372 when 
> ST discontinued the DIP version).
> 
> Olivier
> 
> On Wed, Jun 11, 2014 at 2:28 PM, Roman Sowa <modular at go2.pl> wrote:
> > TS912
> > dual, up to 16V supply, max 200pA bias (at 125 deg.), R-R 
> in and out.
> >
> > Roman
> >
> > W dniu 2014-06-11 13:53, Colin f pisze:
> >
> >> Anyone able to save me trawling through websites and datasheets ?
> >> One thing that bugs me about the TL06x is that it can't get very 
> >> close to the rails.
> >>
> >> Cheers,
> >> Colin f
> >>
> >> _______________________________________________
> >> Synth-diy mailing list
> >> Synth-diy at dropmix.xs4all.nl
> >> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >>
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy