[sdiy] that darned record module i keep obsessing about

[Jay Schwichtenberg]

Actually no.

The amount of discreet logic to do this would be a lot more chips than
putting a processor down to handle everything. Another thing is that if you
need to fix something or add a feature you can usually do it in software if
all the parts are hooked up right. That's a lot easier than having to add
logic, rework circuit boards and so on for a hardware solution.

But then I work with embedded computers so I have a lot of experience with
them and aren't afraid to use them.

Jay S.


-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Henry Birdseye
Sent: Saturday, August 16, 2014 8:43 AM
To: SDIY
Subject: [sdiy] that darned record module i keep obsessing about

Okay,

I've been way overthinking this idea. How much does the viability go up 
if it's 2 analog 10v p-p signal going into level control, a place to 
plug a flash card and a big red button that starts and stop recording 
directly to the card. nothing else. no dsp, no programming, just addac 
and data transfer.

Sound better?

hb
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy