[sdiy] Trouble shooting the PV-1 pitch to voltage converter

[Joe Frey]

Simon and listers, I found I had the wrong value resistors in 2 places 
(4.9K, when it should have been 49.9k) and there is an error in the 
parts list as well, but not on the schematic. The parts list calls for a 
22.1K resistor at R17 and the schematic calls for 221K at R17. I put in 
the 221K and the machine calibrated right up. Again, thanks for all the 
help.

-- 
    (">  <")
    / )   ( \
  ''/ |   / |``
  
"Anything worth doing, is worth doing badly, because it might make it better the next time." --anon

Joe Frey
A.K.A. Bitter Relic of a Bygone Era
joe.frey at radioles.com
http://radioles.com
Chez Judex
http://radioles.com/judex/
Radio Lu-Lu (Internet radio)
http://radioles.com/radiolulu/