[sdiy] My latest Synth Project:NOOTA

[Jim Patchell]

On 8/2/2014 12:48 PM, Joel B wrote:
>> NOOTA
>
> Are you planning on building and selling these or just kits?
>
> Joel
>
>
Well, that depends a lot on how this all works out.  It is a big 
unknown.  I could be the greatest thing since the slinky, or it could 
turn out to be a big dud.  I am excited at the prospect of being free of 
the OTA.  But there is also a huge risk.  If everything works out OK, 
you will have a few options. I will at the very least offer bare boards 
and pre programmed ATmega328 for sale. Now, this is going to be an open 
source project.  You will be able to download the CAM files and have the 
PC boards fabbed yourself. The source code for the ATmega328 will also 
be available, and you will be able to download that, and compile  it 
with the WinAVR GCC compiler.  I will also be posting the bill of 
materials, complete with both Mouser and Digikey part numbers.

But again, I first have to get one to work.

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com