[sdiy] FrontPanelExpress studs and standoffs

[Dave Brown]

I took the survey from FrontPanelExpress and gave them some comments.  They
called me to discuss and at the end sent me a sample of their standoffs and
studs.  They are quite nice.  They mill a hole on the rear of the panel and
then epoxy in a stud or standoff that has a flat head on it into the hole.
It is very secure and solid and there is no indication on the front that
there is anything on the rear.  Just thought I would pass this along.  I
could have used this feature on a couple of my designs to eliminate front
screw heads.

David J. Brown
Email davebr at earthlink.net
Website http://modularsynthesis.com