[sdiy] breadboard, was: Minimum spacing between 1/4" jacks on DOTCOM modules..

[Ian Fritz]

At 01:28 PM 5/19/2013, Thomas Strathmann wrote:
>On 19.05.13 18:30, David G Dixon wrote:
> > The physical making of the board is trivially easy once you have a 
> system in
> > place.  It may take a few minutes longer than stuffing a breadboard, but
> > then you have a permanent circuit.
>
>You forget that one also needs enough room to work with chemicals and a
>drill press. That's not a given.

Plus all that, you have to know beforehand that the circuit will work 
properly.  Which brings us right back to the whiteboard.

Ian