[sdiy] Your current fave ARM Cortex-M dev board...

Martin Klang mars at pingdynasty.com
Fri Jun 28 13:16:11 CEST 2013


The STM discovery boards are a great place to start with bare-bones ARM coding, and very cheap.

What's your friend's experience with embedded coding? Bare-bones ARM can be a bit of a steep learning curve, I found.

I've not tried them but the MBeds are popular, and probably a lot easier to get going with.

Then there's the Forebrain from universal air [1] which is great and has some good libraries.

hth,

Martin

[1] http://www.universalair.co.uk/control/forebrain



On 28 Jun 2013, at 10:42, Justin Owen wrote:

> No - of course I'm not asking this for me! ;)
> 
> Mate of mine, very serious software programmer, taking some time off, wants to get a good dev board to keep his sanity in check. He's into all sorts of stuff - including robotics and, obviously, synths and audio.
> 
> He's asked for advice on dev boards based on (probably) the Cortex M. He doesn't have a specific project in mind - but assume it could be just about anything.
> 
> He likes to pull stuff apart as well - so I guess something with access to schematics/board files might also be helpful.
> 
> Thought I'd ask here... any suggestions?
> 
> Thanks,
> 
> J
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy



More information about the Synth-diy mailing list