[sdiy] Your current fave ARM Cortex-M dev board...

Stewart Pye stewpye at optusnet.com.au
Fri Jun 28 13:08:23 CEST 2013


I haven't used Mbed or the Freescale ARM processors myself, but I'd be 
checking this out if I wanted to get started using an ARM microcontroller...

http://mbed.org/blog/entry/mbed-enabled-Freescale-FRDM-KL25Z-board/

Stew.

On 6/28/2013 7:42 PM, Justin Owen wrote:
> No - of course I'm not asking this for me! ;)
>
> Mate of mine, very serious software programmer, taking some time off, wants to get a good dev board to keep his sanity in check. He's into all sorts of stuff - including robotics and, obviously, synths and audio.
>
> He's asked for advice on dev boards based on (probably) the Cortex M. He doesn't have a specific project in mind - but assume it could be just about anything.
>
> He likes to pull stuff apart as well - so I guess something with access to schematics/board files might also be helpful.
>
> Thought I'd ask here... any suggestions?
>
> Thanks,
>
> J
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>



More information about the Synth-diy mailing list