[sdiy] Roland JX-3p vca - noise

[Florian Anwander]

Hello

> If anyone has a part number for the output sockets, please share.
> Could be that I've experienced similar(ish) problems.
> I did get a new socket that may be suitable from Rapid, but haven't
> taken the time to check it yet..
I would desolder the sockets, wash them with medical alcohol, apply Caig 
Deoxit, let the Deoxit dry and solder the sockets back. I don't like 
spraying Deoxit in any electronic device, because 90% of the spray reach 
parts, that it shouldn't touch; but using it on the separated sockets 
does wonders.

Florian