[sdiy] Carbon composition... vs carbon film resistors..

[Barry Klein]

I am repairing a Minelab metal detector coil and came across a 511 ohm
(damping) resistor across the RX coil of a DD coil.  I measured it with my
LC102 for inductance and got 233uH.  I tried one from my parts bin and got
the same.  Is this real or a measurement artifact of the meter?  I'm going
to test a carbon comp for comparison.

Barry


-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Jean-Pierre
Desrochers
Sent: Monday, February 11, 2013 05:37
To: synth-diy at dropmix.xs4all.nl
Subject: [sdiy] Carbon composition... vs carbon film resistors..

Reading the following info about resistor types :
http://www.electronics-tutorials.ws/resistor/res_1.html

Can I conclude that 5% -> carbon film <- type resistors like these :
http://www.yageo.com/documents/recent/Leaded-R_CFR_2011.pdf

will show the same results as the following 5% -> carbon composition <- type
:
http://www.seielect.com/catalog/SEI-RC.pdf

in an audio circuit ?

JP
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy