[sdiy] need help with a filter

[Nugent, Allison C. (NIH/NIMH) [E]]

I've modified the circuit from my original drawing, so I'll draw it up again.  I apologize in advance for sending out photo of a hand drawn schematic!  

Yes, I have an oscilloscope, although it's not a great one.  

A

________________________________________
From: Gordon JC Pearce [gordonjcp at gjcp.net]
Sent: Saturday, December 21, 2013 2:41 PM
To: synth-diy at dropmix.xs4all.nl
Subject: Re: [sdiy] need help with a filter

On Sat, Dec 21, 2013 at 06:33:45PM +0000, Nugent, Allison C. (NIH/NIMH) [E] wrote:
> Hello,
>
>
> I don't have a lot of experience building stuff like this, and problems that are obvious to more experienced folks are not terribly obvious to me.   But I really want to get this thing finished...  if you have any ideas, please let me know.  I'm happy to post a schematic, if that would be helpful.
>

If you could draw out a diagram of exactly what you've built and how you're creating the virtual ground, that would be helpful.

Quite often opamp circuits get right uppity about being run with the inputs and outputs floating, especially if there's some feedback with a bit of phase shift around them.  Like, oh for instance, a filter...

Check your virtual ground is properly decoupled, and try sticking a resistor to that point from both your output and input to ensure they're not floating.

Have you got an oscilloscope?

--
Gordonjcp MM0YEQ

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy