[sdiy] VCA signal analysis

Needham, Alan Alan.Needham at centrica.com
Mon Dec 9 15:53:17 CET 2013


-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of ChristianH
Sent: 09 December 2013 14:39
To: synth-diy at dropmix.xs4all.nl
Subject: Re: [sdiy] VCA signal analysis

On Mon, 9 Dec 2013 13:52:52 +0000 Neil Johnson <neil.johnson71 at gmail.com> wrote:

> A notch filter also allows you to spend your limited sensitivity and 
> resolution on exploring distortion artefacts.  You can pump a healthy 
> signal into your circuit (VCA, filter, telephone line, etc), notch out 
> the fundamental, and then turn the gain up so you can see the all the 
> annoying harmonics from the distortion mechanisms in the circuit.

And from the notch filter <gr>

Chris

_______________________________________________
On 9 Dec 2013, at 15:05, "cheater00 ." <cheater00 at gmail.com> wrote:
> 
> How do you measure the distortion introduced by the self-made notch filter?

By connecting the output of the notch filter to the distortion analyser.
_______________________________________________


_____________________________________________________________________
The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales).

The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary.

British Gas Trading Limited (company no: 03078711) British Gas Services Limited (company no: 3141243), British Gas Insurance Limited (company no: 06608316) and Centrica Energy (Trading) Limited (company no: 02877397) are all wholly owned subsidiaries of Centrica plc (company no: 3033654). Each company is registered in England and Wales with a registered office at Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD.

British Gas Insurance Limited is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority.  British Gas Services Limited and Centrica Energy (Trading) Limited are authorised and regulated by the Financial Conduct Authority.  British Gas Trading Limited is an appointed representative of British Gas Services Limited which is authorised and regulated by the Financial Conduct Authority.



More information about the Synth-diy mailing list