[sdiy] Roland M-16C Memory Cartridge

[Jack Jackson]

Could you provide some links where I could start looking? "cartridge case" as a search term brings up firearms on google.

I see on the schematic there are also a couple of resistor arrays, a weird transistor with integrated voltage divider on the input, and another weird diode pair.

________________________________
> Date: Mon, 2 Dec 2013 15:02:43 +0100 
> Subject: RE: [sdiy] Roland M-16C Memory Cartridge 
> From: cheater00 at gmail.com 
> To: jackdamery at hotmail.co.uk 
> CC: synth-diy at dropmix.xs4all.nl 
> 
> 
> On 2 Dec 2013 14:58, "Jack Jackson" 
> <jackdamery at hotmail.co.uk<mailto:jackdamery at hotmail.co.uk>> wrote: 
>> 
>> I was thinking of using these guys. 
>> 
>> http://www.3dprint-uk.co.uk/portfolio/materials/ 
>> 
>> They only use white nylon, and you can see in the video that it's not 
> at all brittle and very strong! 
>> Thickness could definitely be thin enough for this application. 
> 
> First try hard to find a case or connector. Printing is a cop-out :-) 
> and expensive. There are umpteens of connectors out there, one must 
> work. You might need washers to keep the two halves of the shell 
> slightly apart. 
> 
> D.