[sdiy] mini-din socket - panel mount?

[Dave Brown]

My Tenori-On actually has a 6 pin mini-DIN connector with a pigtail that
fans it out to a standard 5 pin DIN MIDI in and out so I guess I have seen
one.

Dave

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Paul Burns
Sent: Wednesday, April 17, 2013 12:22 PM
To: 'Martin Klang'; 'Ingo Debus'
Cc: 'Synth-Diy DIY'
Subject: Re: [sdiy] mini-din socket - panel mount?

"I've actually never seen mini-DIN used for MIDI, just the standard 5 pin
DIN"
There was a Creative card (early Audigy? Possibly earlier? ) that had two
mini 5 pin DIN sockets on , and came with two short full sized to mini
cables. So they were PCB mounted through bracket.

regards


-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Martin Klang
Sent: 17 April 2013 19:46
To: Ingo Debus
Cc: Synth-Diy DIY
Subject: Re: [sdiy] mini-din socket - panel mount?


On 17 Apr 2013, at 16:36, Ingo Debus wrote:

> The WX cable that comes with the Yamaha WX5 Wind Controller has a plug
with a screw collar (5 pin mini DIN). I'd love to know where to buy that
plug separately.

If it is the same as the WX11 then it fits a standard 6-pin mini-din socket,
but the bayonet locking collar is probably unique.

>> I've actually never seen mini-DIN used for MIDI, just the standard 5 
>> pin DIN
> 
> Well, Yamaha's WX is sort-of MIDI, plus power supply.

do you know the pin-out?

best,

Martin
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy