[sdiy] mini-din socket - panel mount?

[Dave Brown]

I used a 4 pin mini-DIN on my ComputerVoltageSource module.  The parts list
and Mouser numbers are on the page.
http://modularsynthesis.com/cvs/DJB_CVS_2-17-08_documentation.pdf

The Mouser number is  161-381/4-E.  It takes a fairly large hole and there
is a flange on the front that I recessed.  It isn't necessary but the
details will be in my FrontPanelExpress file.  Note that this connector has
threads on the front so you can screw the mini-DIN on but I have been unable
to ever find the mating connector.  I've written to Mouser with no help but
have not tried asking Kobiconn.  The plugs stay inserted but they are a bit
loose.

Dave

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Plutoniq9 .
Sent: Monday, April 15, 2013 12:39 PM
To: synth-diy at dropmix.xs4all.nl
Subject: [sdiy] mini-din socket - panel mount?

I'm trying to track down a 5-pin (or greater) mini din socket that can be
panel mounted like a 1/4" with a nut. Does such a product exist? The
footprint is hopefully 1/4" or smaller to replace mono 1/4" jacks in my
EML-101 without needing to drill/modify the case.

Tanks in advance

Ryan (p9)

Sent from my iPhone
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy