[sdiy] More SMT

[Dave Manley]

On 4/14/2013 9:28 PM, Scott Gravenhorst wrote:

>
> I was paranoid about soldering if it wasn't held down somehow.  I used masking tape.  I do agree
> that it is probably not necessary since the paste flux is sticky and these boards have a heavy
> solder mask that helps align the pins.
>
>
>
>
> -- ScottG
> ________________________________________________________________________

For me the key is to preload the corner pad, and position that one first corner
pin.  Once that done the rest will follow.

-Dave