[sdiy] Dotcom synth supply rails harness suggestions needed...

[Andre Majorel]

On 2012-09-24 07:25 -0400, Jean-Pierre Desrochers wrote:

> I was thinking of using a PCB with large traces close to the
> supply voltage outputs that would interconnect the main supply
> voltages to all the modules supply cables.

I didn't bother with a PCB. I drilled holes into a thin piece of
poplar from a fruit crate and soldered the .156" headers to some
1.5 mm² solid core wire left over from the electrical wiring of
my flat.

-- 
André Majorel http://www.teaser.fr/~amajorel/