[sdiy] Moog Source encoder issue

[Tom Wiltshire]

I'd just replace the regulator for something like this. After all, the one that comes out is how many years old?
Stick a nice new one with shiny legs in. They don't cost much.

T.

On 12 Sep 2012, at 23:51, Paul Cunningham wrote:

> Also... don't waste your time trying to use a pencil eraser to clean the regulator pins. Try some fine grit sandpaper or an emory board and be *very* careful that you do not bend the pins -- they can break easily! -pc
> 
> On Sep 12, 2012, at 6:46 PM, Paul Cunningham wrote:
> 
>> Yeah, if you haven't addressed the "crazy source" problem, you should go about doing that first! It will dramatically effect the stability of your power supply. Chances are this is causing your problem:
>> 
>> http://www.encoreelectronics.com/images/crazy.jpg
>>