[sdiy] PCB manufacturers for SMD

[Neil Johnson]

Tom,

> Olimex (who I've used in the past) give a 8mils minimum track width/space, and the pads on this chip are too close to meet that, so I need somewhere else, I think.

According to the Microchip datasheet for that device the recommended
distance between pads on the land pattern is 8mil (0.2mm).  So either
your DRC is slightly off or you need to review your land pattern.

Neil
-- 
Modules and more: http://www.cesyg.com
Homepage: http://www.njohnson.co.uk