[sdiy] anyone have a Power One HBB15-1.5 schematic?

[mark verbos]

Thanks Jean-Pierre et al!
It's now fixed.

Mark



On Oct 22, 2012, at 7:40 AM, Jean-Pierre Desrochers wrote:

> The following schematic is for a Power One HCBB-75W-A supply which
> includes a HBB15-1.5 like yours (lower section of the drawing)
> and a 5volts at 500mA section.. both in the same schematic.
> 
> http://www.arcenson.com/projects/Modular/M200_Power_Supply/Power_One_HCBB-75W-A_supply/Power-One_HCBB-75W-A_schematic.pdf
> 
> Good luck,
> JP
> 
> ----- Original Message ----- From: "mark verbos" <mverbos at earthlink.net>
> To: "Synth DIY" <synth-diy at dropmix.xs4all.nl>
> Sent: Sunday, October 21, 2012 9:07 PM
> Subject: [sdiy] anyone have a Power One HBB15-1.5 schematic?
> 
> 
>> mine has a negative side that's putting out -24volts. It would be a lot easier to fix with a schematic.
>> 
>> thanks!
>> 
>> Mark
>> 
>> 
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy