[sdiy] Akai S612 power problems

Needham, Alan Alan.Needham at centrica.com
Thu Oct 4 09:31:49 CEST 2012


So the +/- 12v rails are OK when the =/_5v rails are sagging?
Can you measure the current on these two rails?
I am wondering if there is an overload on them...


-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Adam Inglis
Sent: 04 October 2012 04:57
To: *SYNTH DIY
Subject: [sdiy] Akai S612 power problems

replacing that, I  
get my 12 volts back, and checking all voltages again around the PCB  
is all good... until I hook it up, and again, the +/- 5 v rails are  
sagging.


_____________________________________________________________________
The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales).

The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary.

British Gas Trading Limited (company no: 03078711) British Gas Services Limited (company no: 3141243) and Centrica Energy (Trading) Limited (company no: 02877397), are all wholly owned subsidiaries of Centrica PLC (company no: 3033654).  Each company is registered in England and Wales with a registered office at Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD.

British Gas Services Limited (BGS) and Centrica Energy (Trading) Limited are both authorised and regulated by the Financial Services Authority (FSA registration numbers are 490568 and 232514, respectively). BGS is authorised and regulated by the FSA for insurance mediation services.  British Gas Trading Limited is an appointed representative of BGS for insurance mediation services (FSA registration number: 439467).



More information about the Synth-diy mailing list