[sdiy] Looking for MATRIX 12/ Xpander florescenct display.

[Christophe Janot]

Hi Mike !

Until now, the only solution is this kit : http://www.lenham.clara.net/sound/market.html It is quite expensive since you have to replace the 3 displays. I'm not sure this kit is already available. I'm studying a similar product, but I'm not close to the solution ;-)

Regards,

Christophe

Le 30 mai 2012 à 18:37, mike schmidt a écrit :

> Thanks everyone for your suggestions! I ended up going with little diode in the uk, as suggested by christophe. part works great, and was pretty cheap to boot. Fwiw, it had a mid 90s date code.
> 
> I have one Final issue with the Matrix, The 20th character on the top right display is out. every segment in that character is out. Any ideas? Does anyone have a replacement for the florescent display? I've swapped the driver ics around, in hopes that the problem would follow, but alas, it didnt.
> 
> Thanks in advance!
> 
> -Mike
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy