[sdiy] Old unique VCO - T?==?windows-1256?Q?une drifting problem - adapting a servo c?==?windows-1256?Q?onversion‏

[Idris El Kasri]

  Very interesting, as Gergo's suggestion..
Do you think I could try that with 10V without any modification (as it is 9V for the Minisonic) ?

----------------------------------------
> Date: Fri, 11 May 2012 17:56:10 +0100
> From: Alan.Needham at centrica.com
> To: Gergo_Palatinszky at epam.com; synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] Old unique VCO - T?==?windows-1256?Q?une drifting problem - adapting a servo c?==?windows-1256?Q?onversion‏
>
> The PE Minisonic had an oven as an option.
> http://www.timstinchcombe.co.uk/synth/pe_mini/pe_mini_feb_75.pdf
> Circuit on magazine page 145 (pdf page 6 of 7)
> I remember it taking about a minute to settle.
>
>
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Gergo Palatinszky
> Sent: 11 May 2012 15:49
> To: synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] Old unique VCO - T?==?windows-1256?Q?une drifting problem - adapting a servo c?==?windows-1256?Q?onversion‏
>
> Hi,
>
> What about using a 3046(3086) and use one of the spare transistor inside as heater ... ASM-2 did this way if I'm right ....
>
> Br,
> Pala
>
>
>
> _____________________________________________________________________
> The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy,distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales).
>
> The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary.
>
> British Gas Services Limited and Centrica Energy (Trading) Limited, both wholly owned subsidiaries of Centrica PLC, are authorised and regulated by the Financial Services Authority.
>
> Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD
>
> Registered in England No 3141243.
>
> Centrica plc
>
> Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD
>
> Registered in England and Wales No 3033654
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy