[sdiy] Knobs?

[Mattias Rickardsson]

Some of those at Mammoth looks like Tyco knobs:
http://www.te.com/catalog/feat/en/c/16136

/mr

On 26 March 2012 19:57, Bob K <farfisa5 at gmail.com> wrote:
> A bit late to the party but Mammoth Electronics has some beautiful
> aluminum knobs.
>
> http://www.mammothelectronics.com/category-s/25.htm
>
> The plastic ones are kinda bleh but the aluminum ones are quite nice looking.
>
> On Wed, Mar 14, 2012 at 5:11 AM, Altitude <altitude at optrand.com> wrote:
>> Sifam has ones that have generic bodies and press on caps that are really
>> nice (you can get blank ones)
>>
>> http://midiot.net/11mmSifam.JPG
>>
>> -----Original Message-----
>> From: synth-diy-bounces at dropmix.xs4all.nl
>> [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Paul Perry
>> Sent: Tuesday, March 13, 2012 10:09 PM
>> To: synthdiy diy
>> Subject: Re: [sdiy] Knobs?
>>
>> Speaking of knobs, I have found it difficult to locate knobs that have NO
>> indicator - the kind that you would put on a rotary encoder, for exampple.
>> Particularly 6mm ones, with a narrow body. (The kind that woud push onto an
>> Alps D shaft).
>>
>> paul perry Melbourne Australia
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy