[sdiy] Knobs?

[Bob K]

A bit late to the party but Mammoth Electronics has some beautiful
aluminum knobs.

http://www.mammothelectronics.com/category-s/25.htm

The plastic ones are kinda bleh but the aluminum ones are quite nice looking.

On Wed, Mar 14, 2012 at 5:11 AM, Altitude <altitude at optrand.com> wrote:
> Sifam has ones that have generic bodies and press on caps that are really
> nice (you can get blank ones)
>
> http://midiot.net/11mmSifam.JPG
>
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl
> [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Paul Perry
> Sent: Tuesday, March 13, 2012 10:09 PM
> To: synthdiy diy
> Subject: Re: [sdiy] Knobs?
>
> Speaking of knobs, I have found it difficult to locate knobs that have NO
> indicator - the kind that you would put on a rotary encoder, for exampple.
> Particularly 6mm ones, with a narrow body. (The kind that woud push onto an
> Alps D shaft).
>
> paul perry Melbourne Australia
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy