[sdiy] midi clock to GATE (or trigger) converter with Arduino???

[Stewart Pye]

There's not really much to debug for MIDI clock to trigger. Just scratch 
your head and edit the code until you get it to work!

Stew.


On 3/2/2012 3:32 AM, Tom Wiltshire wrote:
> On 1 Mar 2012, at 16:00, ChristianH wrote:
>
>> When doing AVR development (not Arduino, but free style hardware), I
>> dedicate an AVR port to an (optional) LCD (4+3 bits needed).
>>
>> Was a bit expensive on the Mega32 in terms of port bits, since there are
>> only 4 byte ports - but once I started using the Mega64, there's usually
>> enough ports to afford that approch.
>>
>> Christian
> That's been my approach on PIC too, which is why I didn't understand what these Arduino types were on with!
>
> But yeah, I get it now. You can't see what's going on 'cos you can't send output to the computer.
>
> T.
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>