[sdiy] MOTM board size ?

Harry Bissell harrybissell at wowway.com
Thu Jun 14 19:08:38 CEST 2012


Looks great. How wide is that front panel ?  You have what... six ICs ?

(I'm looking at at maybe 40+ ICs.  I must be nuts !)

H^) harry


----- Original Message -----
From: David G Dixon <dixon at mail.ubc.ca>
To: 'Harry Bissell' <harrybissell at wowway.com>, 'synthdiy diy' <synth-diy at dropmix.xs4all.nl>
Sent: Thu, 14 Jun 2012 12:50:39 -0400 (EDT)
Subject: RE: [sdiy] MOTM board size ?

> does anyone know what the standard board size for MOTM 
> modules is ?   Has anyone used a bigger form factor than that 
> for an MOTM compatible module ?

I build in MOTM format, and I only really care about board length, as I try
to mount the boards with the longest dimension oriented vertically.  In that
case, the board can be up to about 7.5" long (the panels are 8.75" tall).
This leaves enough space on the ends so as not to interfere with the module
mounting hardware.  I have one board which is nearly that long (the new
Korgasmatron III -- 7.4" long). I mounted this one parallel to the panel
(the first time I've done this) to take advantage of symmetry, and had no
problems whatsoever installing the module in my case.  The whole module is
only about 2.5" deep.  Pictures are here:

http://www.muffwiggler.com/forum/viewtopic.php?t=49531&postdays=0&postorder=
desc&start=100

Look for the post from Sunday, May 06, 2012 at 1:09 pm.


-- 
Harry Bissell & Nora Abdullah 4eva



More information about the Synth-diy mailing list