[sdiy] Storage

Ben Barwise clackjunk at gmail.com
Wed Jun 13 11:58:01 CEST 2012


BTW note that rapid is only selling the rotating base for £170!

On 13 June 2012 10:56, Ben Barwise <clackjunk at gmail.com> wrote:
> I use these but I am going to change, problem is components can catch
> on the inside of the draw so if you are using through hole components
> like resistors you end up with a tangled up tape of resistors, but of
> course they are cool if you use SMD and they usually come with
> dividers so each draw can be divided up.
>
> I was thinking of getting something like this
> http://www.whitediabolo.co.uk/ekmps/shops/whitediabolo/images/bisley-15-multidrawer-filing-cabinet-h3915nl-blue-99-p.jpg
> from a second hand office supply and then putting trays and packets
> inside, there is a place round the corner from me and it has a cabinet
> waist height with about 25 draws!
>
> you mean this?
> http://www.esedirect.co.uk/p-2124-spacemiser-turntable-for-visible-storage-cabinets-boxes.aspx?v=9306
> not cheap!
>
> -Ben
>
>
> On 13 June 2012 10:27, Paul Maddox <yo at vacoloco.net> wrote:
>> So, I've had enough of keeping things in cardboard boxes and paper bags.
>> I'm looking for some storage, ok, a lot of storage for my components.
>>
>> You know, resistors, capacitors, diodes, trasnsistors, ICs, pots,
>> connectors, etc, etc, etc.
>>
>> Best I've found so far is these -
>> http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290600809894&fromMakeTrack=true#ht_2514wt_1199
>>
>> But that's going to take a lot of wall space (I want about 8 to 10 of them).
>> I recall a while back seeing something that was about 6 foot tall and
>> rotated, giving four sides of storage drawers, but I just can't find
>> anything like that online.
>>
>> Anyone have any solutions/advice?
>>
>> Paul
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy



More information about the Synth-diy mailing list