[sdiy] UA726 needed for repairs

[Robert Weigel]

Great to hear!  So I wonder if the cem3374's that they put up the other
day were legit too??  Maybe I should go ahead and order some and see.  Had
bad results with the ones for the crumar months ago...the TMS3617...
including having them advertise dip-28 then send an sdip package and the
dip who sent it tried to rationalize that this was really the same
thing....lol...


> Am 11.01.2012 01:25, schrieb Dave Leith:
>> Does anyone know of a good source for Fairchild UA726 needed for
>> repairs?
> latest news via matrixsynth:
>
> http://m.matrixsynth.com/2012/01/ua726hc-ua726-clone-tested.html
> --------------------
> For the DIYers
>
> flickr set By Ramcur
> (click for more)
>
> "This is the infamous ua726hc non-gold pinned that we can purshase on
> Ebay [here] . i ad similar result with an original. the lower the
> voltage the lower the temp , from this result . The tracking was out
> compare with an original but can be adjusted to track perfectly .. SO
> YES IT IS WORKING AND YOU CAN EASILY SELECT YOUR VCO FOR SAME DROP OF
> VOLTAGE AND TEMP """"" On the minimoog there is a blue paint dot , my
> gess is that moog selected there UA726 to expect standardized result ,
> not to be too far off , so calibration can be more easy( and possible )."
>
> This one in via JB.
> --------------------
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>


-- 
Check website at http://sounddoctorin.com for synthesizer technical help,
parts, and a tour of the studio, and archives of various discussions to
provoke thought.