[sdiy] UA726 needed for repairs

[Florian Anwander]

Am 11.01.2012 01:25, schrieb Dave Leith:
> Does anyone know of a good source for Fairchild UA726 needed for repairs?
latest news via matrixsynth:

http://m.matrixsynth.com/2012/01/ua726hc-ua726-clone-tested.html
--------------------
For the DIYers

flickr set By Ramcur
(click for more)

"This is the infamous ua726hc non-gold pinned that we can purshase on 
Ebay [here] . i ad similar result with an original. the lower the 
voltage the lower the temp , from this result . The tracking was out 
compare with an original but can be adjusted to track perfectly .. SO 
YES IT IS WORKING AND YOU CAN EASILY SELECT YOUR VCO FOR SAME DROP OF 
VOLTAGE AND TEMP """"" On the minimoog there is a blue paint dot , my 
gess is that moog selected there UA726 to expect standardized result , 
not to be too far off , so calibration can be more easy( and possible )."

This one in via JB.
--------------------