[sdiy] Eurorack panels DIY

[Ullrich Peter]

Hi!

I am also using the cheap bother printers. Works well, you just have to take care that the labels don't get too hot as they are made  by a thermoprinter...

Another method is printing on normal paper and use hot laminating on a sticky foil and glueing this to the alu panel.

Ciao
Peter

-----Ursprüngliche Nachricht-----
Von: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] Im Auftrag von Thomas Strathmann
Gesendet: Mittwoch, 25. Jänner 2012 16:36
An: synth-diy at dropmix.xs4all.nl
Betreff: Re: [sdiy] Eurorack panels DIY

On 1/25/12 16:28 , BARRY KLEIN wrote:
> Temporary labeling - do the new label printer labels stick well to the aluminum?  Are there differences between brands or tips you have?

I use a cheap Brother device for labeling which works reasonably well.
So far (several months later) no problems with labels coming off once I have adhered them firmly to the bare aluminum panels

	Thomas
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

The information contained in this e-mail message is privileged and
confidential and is for the exclusive use of the addressee. The person
who receives this message and who is not the addressee, one of his
employees or an agent entitled to hand it over to the addressee, is
informed that he may not use, disclose or reproduce the contents
thereof, and is kindly asked to notify the sender and delete the e-mail
immediately.