[sdiy] plastic laminator for front panels.

[Jean-Pierre Desrochers]

Have a look at the way I use self adhesive vynil with applied
baked frosted transparent laminate on it for all my DOTCOM modules front panels.
White lettering on black.
Construction and assembly using auto adhesive, laminated vinyl
for front panel layout placed on front aluminium plate and a table press punch for all holes:

http://www.arcenson.com/projects/modular/M100%20MIDI%20Interface/Module%20pictures/

JP


 On Thu 19/01/12 08:00 , Dave Kendall davekendall at ntlworld.com sent:
> Hi.
> 
> Anybody got any experiences they could share, or recommendations for a 
> cheap but adequate unit?
> I've previously used glossy paper sealed with automotive laquer, but 
> the edges seem to be susceptible to damage/peeling, so am looking for a
> tougher alternative.
> Black print on white is OK - colour is not needed.
> 
> Are there any significant downsides that anyone knows of?
> 
> FWIW, I'm  based in the UK .
> 
> cheers,
> Dave
> 
> _______________________________________________
> Synth-diy mailing list
> S
> ynth-diy at dropmix.xs4all.nlhttp://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 
>