[sdiy] Anybody have CA3080AE or LM3080AN chips for sale ?

[Jean-Pierre Desrochers]

The supply voltages will be +/- 15vdc.

Check the differences between the CA3080 and CA3080A in this page:
http://html.alldatasheet.com/html-pdf/66317/INTERSIL/CA3080AE/649/2/CA3080AE.html

and the differences between the LM3080N and LM3080AN in this page:
http://html.alldatasheet.com/html-pdf/8836/NSC/LM3080AN/82/2/LM3080AN.html

The specs for the 'A' suffix parts are tighter and better than the 'N' 
versions.

The need I have is for the MOTM-300 ultra VCO I'm building.
see the BOM here:
http://www.synthtech.com/tech/M300_bom.pdf

The bill of material ask for a CA3080AE in the TRIANGLE to SINE
wave shaping part of the schematic..
But maybe I'd be OK with the LM3080N's available around ?

JP



----- Original Message ----- 
From: "Doug Terrebonne" <dougt55 at yahoo.com>
To: <jpdesroc at oricom.ca>; <synth-diy at dropmix.xs4all.nl>
Sent: Thursday, January 05, 2012 10:13 PM
Subject: Re: [sdiy] Anybody have CA3080AE or LM3080AN chips for sale ?


> Do you need +/- 22V per rail power supply instead of +/-18V? That's the 
> only
> different I see...
>
>
> ----- Original Message ----
>> From: Jean-Pierre Desrochers <jpdesroc at oricom.ca>
>> To: synth-diy at dropmix.xs4all.nl
>> Sent: Thu, January 5, 2012 5:55:51 PM
>> Subject: Re: [sdiy] Anybody have CA3080AE or LM3080AN chips for sale ?
>>
>>
>> Thanks Doug for your offer,
>> but I need the CA3080AE or LM3080AN  parts.
>>
>> J-Pierre
>>
>>
>>
>>  On Thu 05/01/12 20:50 , Doug Terrebonne dougt55 at yahoo.com sent:
>> >
>> > Hi,  I have LM3080N.
>> >
>> > Doug
>> > --- On Thu, 1/5/12, Jean-Pierre  Desrochers  ricom.ca> wrote:
>> > > From: Jean-Pierre  Desrochers  ricom.ca>> Subject: [sdiy] Anybody 
>> > > have
>>CA3080AE  or
>> > LM3080AN chips for sale ?> To: s
>> > ynth-diy at dropmix.xs4all.nl>  Date: Thursday, January 5, 2012, 5:37
>> > PM>
>> > > Hi  list,
>> > > Does Anybody have CA3080AE or LM3080AN chips for
>> > sale  ?> I'd buy a quantity of 15 (paypal).
>> > > (No 3080E suffix  please..)
>> > > Thanks !
>> > > J-Pierre
>> > >
>> >  _______________________________________________> Synth-diy mailing 
>> > list
>> > > S
>> > ynth-diy at dropmix.xs4all.nl>
>>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy>
>>
>> >
>> >
>> >
>> _______________________________________________
>> Synth-diy  mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>