[sdiy] Moog Rogue Tempco

[Magnus Danielson]

On 02/13/2012 05:33 PM, Harry Bissell wrote:
> usually +3500ppm. people have used more common +3300 and +3900 as well, check the archives
> for more info. In particular, some have used an additional low drift NON compensated resistor (maybe 50ppm) in series
> to trim the total tempco.

The archives should be stuffed with this stuff, it's been a re-occuring 
discussion over the years I've been here. People have tried many 
different solutions and reported back.

Cheers,
Magnus