[sdiy] Moog Rogue Tempco

[Harry Bissell]

usually +3500ppm. people have used more common +3300 and +3900 as well, check the archives
for more info. In particular, some have used an additional low drift NON compensated resistor (maybe 50ppm) in series
to trim the total tempco.

H^) harry


----- Original Message -----
From: Julien Delgoulet <jdelgoulet at free.fr>
To: synthdiy diy <synth-diy at dropmix.xs4all.nl>
Sent: Sat, 11 Feb 2012 18:22:43 -0500 (EST)
Subject: [sdiy] Moog Rogue Tempco

Hi all,

I'm trying to replicate the moog rogue VCO and was wondering what could be the ppm for the 100Ohm tempo …
The service manual only says : "100Ohm TC" … :-(

Any idea ?
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

-- 
Harry Bissell & Nora Abdullah 4eva