[sdiy] (ot) arduino DUEMINALOVE 328 bootloader hex file?

dan snazelle subjectivity at hotmail.com
Wed Feb 8 03:08:38 CET 2012


I am using the arduino board itself with a few wires going to a breadboard....i think i will look up how to do this with AVRdude...i know it CAN be done

check out dans music at



youtube channel:


On Feb 7, 2012, at 9:00 PM, Ove Ridé wrote:

> On 8 February 2012 02:44, dan snazelle <subjectivity at hotmail.com> wrote:
>> interesting
>> how would I "Read out" the contents of the flash area?
>> as I am only used to the arduino IDE, and that IDE keeps so much of the details hidden, the only experience I have is either hitting UPLOAD or selecting "burn bootloader" from
>> the dropdown menu
> What kind of adapter are you using for the bootloader flashing? If for
> example you're using a simple parallel port adapter, you could use
> PonyProg, for example. (Windows)  Or avrdude that comes with the
> Arduino environment, which is what I believe is what's used for the
> bootloader flashing when used from the GUI. I'm not familiar with the
> specifics of how to use it, but it should be able to do everything you
> would ever want to do, read, write, verify and more.
> -- 
> /Ove
> Blog: <http://blog.gg8.se/>
> "Here is Evergreen City. Evergreen is the color of green forever."

More information about the Synth-diy mailing list