[sdiy] Christmas Projects

Dave Brown davebr at earthlink.net
Mon Dec 17 01:13:43 CET 2012

I'm trying to restore up a 1984 Wersimatic CX-2 Digital Drum machine.
Someone else had worked on this previously and replaced bad parts with wrong
parts and then tried to modify the circuit to make them work!  Interconnect
cables and connectors have melted so obviously the current limit didn't do
much.   I've now got the power supply up and running and powered on all the
logic.  No shorts and the 7 segment display changes!  Everything's in German
and there is no interconnect diagram.  It is a plug-in card cage so I can't
access any boards and it appears there were many different options and
configurations with differing plug-ins.  Should be loads of fun.

And then I have a Fender 2235 power amp with most all the outputs and
drivers shorted ...


David J. Brown
Email davebr at earthlink.net
Website http://modularsynthesis.com

-----Original Message-----
On 16 Dec 2012, at 01:08, "Jim Patchell" <patchell at cox.net> wrote:
> Well, I am back working on doing the PC board layyout for the Cheezy Synth
Moduule.  I am putting an ATmega2561 on board, and I am going to try and
make the thing Arduino Compatable.
> Somewhere around here I have an Arduino with a 2560 on it, and from I have
gathered, the 2561 is the same, just lacks some pins.
> So, what are you guys doing for a Christmas Project?
> -Jim
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

More information about the Synth-diy mailing list