[sdiy] Buffered/unbuffered CMOS in Oberheim logic boards

[Magnus Danielson]

On 08/04/2012 10:02 PM, Dave Manley wrote:
> Unfortunately the answer is probably 'it depends'.  If used strictly for digital functions then using buffered gates is (probably) ok.  If the old timers were doing some oddball analog weirdness only possible with unbuffered gates, then no.  Are there schematics?

Some parts of the logic may also depend on the gate delay of individual 
parts for proper operation.

Then again, there are places where you can fit new stuff in without any 
issue at all.

Schematics is available.

Cheers,
Magnus