[sdiy] Front Panel blues

[Jean-Pierre Desrochers]

Check the technique I used to make my MIDI interface front panel here:
http://www.arcenson.com/projects/modular/M100%20MIDI%20Interface/Module%20pictures/

JP


----- Original Message ----- 
From: "Tim Ressel" <madhun2001 at yahoo.com>
To: "Synth-Diy" <synth-diy at dropmix.xs4all.nl>
Sent: Sunday, September 18, 2011 2:47 PM
Subject: [sdiy] Front Panel blues


> Hey,
>
> I've been using photo paper for making diy front panels. It works great 
> but has a few drawbacks. A friend told me about Lazertran. He uses the 
> bake-on method where the printing is on the underside where its protected. 
> I tried it twice with dismal results. I've tried printing on transparency 
> materiel and using double-sided tape but the tape shows too much. Does 
> anyone have another method of printing on clear material and attaching it 
> onto aluminum panels?
>
> Thanks!
>
> --TimR
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy