[sdiy] Front Panel blues

[Ullrich Peter]

there are hot laminating foils with sticky backside you could use.
I normally laminate printed paper for front panels but you could try it with printed foils too..

You can see the result on the synth.net site where i published my gorf sequencer design:
http://synth.net/searchKeyword.php?keyword=synpro

ciao
peter

http://www.ullrich.at.tf

________________________________________
Von: synth-diy-bounces at dropmix.xs4all.nl [synth-diy-bounces at dropmix.xs4all.nl] im Auftrag von Tim Ressel [madhun2001 at yahoo.com]
Gesendet: Sonntag, 18. September 2011 20:47
An: Synth-Diy
Betreff: [sdiy] Front Panel blues

Hey,

I've been using photo paper for making diy front panels. It works great but has a few drawbacks. A friend told me about Lazertran. He uses the bake-on method where the printing is on the underside where its protected. I tried it twice with dismal results. I've tried printing on transparency materiel and using double-sided tape but the tape shows too much. Does anyone have another method of printing on clear material and attaching it onto aluminum panels?

Thanks!

--TimR

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

The information contained in this e-mail message is privileged and
confidential and is for the exclusive use of the addressee. The person
who receives this message and who is not the addressee, one of his
employees or an agent entitled to hand it over to the addressee, is
informed that he may not use, disclose or reproduce the contents
thereof, and is kindly asked to notify the sender and delete the e-mail
immediately.