[sdiy] Oscilloscope Adapter Box

[Dave Brown]

I took my old BNC-BNC cables that came with my networking card (remember
when networks were thick, thin, or twisted pair?) and cut one end off and
replaced it with a 1/4" mono plug.  I made 4 of them and use them all the
time as 1X scope probes when working with audio gear.  If I want to tap into
a signal, I just use a 1/4" Y adapter.  They work well.

Dave

> > I wana build a small box with 2 channels of 1/4" ins
> and outs, with a BNC connector in between each, as to simplify 
> connection to my oscilloscope.
> > 
> > My cursory thought is to just do direct connections,
> nothing fancy, though might things like shielding or some kind of hash 
> rolloff RC network be beneficial or unnecessary?
> > 
> > Bandwidth is audible to infrasonic, signal levels are
> guitar pickups to modular levels.
> > 
> > 
> > _Kyle