[sdiy] box of old proto parts etc. some gold plated

[Bob Weigel]

A fellow tech wanted to see if anyone wants it all.  Can't send 
attachments I guess so if you want to see I'll send you a .jpg of the 
contents .  But we have this little fuse holders that hold the radial 
fuses, some fuses.  Lots of the little gold and silver both of the 
little pins you solder into a through hole as a test point.... or whatever.

AND then we have a bunch of the ones that screw down onto a stud that do 
the same thing..but they're maybe steel?

And then multi color pin jacks and receptacles and the solder on ones 
also used for bias test points on amps etc.

And some of the really nice things with half inch or so of thread on one 
half below a nut and above they have a spring loaded cap that presses 
down to allow you to put a wire in a curved hole thing.  If you've seen 
them you probably know from that description.

94375-L-3301-100-819  These are some gold plated connector.   Very 
expensive looking coaxial i/f.  THere is a base that has four mounting 
hols and allows one to solder inside a chassis to the middle pin with 
what appears teflon insulator around it.  It threads on the outside into 
the connector that attaches to it which is a high end small coax 
connector.  Anyway just three complete units of that it looks like and 
the some other coax gold plated panel female connectors of similar size 
but push instead of thread on.

And some neat little SPECTROL screw driver actuated rotary switches with 
10 positions it appears.

And some RCA male and female stuff there.  Whatever.  If anyone is 
interested let me know -Bob

-- 
Check out sounddoctorin.com for songs, a studio tour, help
repairing old synthesizers and parts or thought provoking
articles that could help make your eternity!